What should be paid attention to in the operation of waste plastic recycling pelletizing machine?

waste plastic recycling pelletizing machine production operation needs to pay attention to the following points: The correct operation of waste plastic recycling pelletizing machine has the advantage of extending the service life of the equipment, but the use of waste plastic recycling pelletizing machine is not enough in our daily life. Paying attention to it will also cause some unnecessary problems and need to keep the following points in mind.

1. In case of malfunction or abnormal situation, the relevant personnel must be reported and handled by professional maintenance personnel. If it is found that there is an abnormal phenomenon affecting safety, immediately press the emergency stop switch to cut off the power.

2. Do not use low-quality materials with metal impurities or sediment (it is best to add a loading iron remover to remove iron from the plastic during the feeding process). Do not place metal objects that may fall into the vicinity of the feed port. Putting it into the feeding hopper will aggravate the wear of the screw and the barrel or cause jamming and damage.

What should be paid attention to in the operation of waste plastic recycling pelletizing machine?

3, pay attention to fire safety, fire extinguisher must be placed around the waste plastic recycling pelletizing machine in the production process.

4. Plastic machinery should be operated strictly in accordance with the requirements of the operating procedures, and must not be operated in violation of non-operational stations. To ensure the reliability of the safety device, the safety protection measures of the machine must not be destroyed for efficiency.

5, waste plastic recycling pelletizing machine production and operation, plastic temperature does not reach the set temperature when the holding time is not enough, it is not allowed to start the screw. 6. Operate by an operator who is trained and familiar with the performance and operating procedures of plastic mechanical structures.

7. The waste plastic recycling pelletizing machine gearbox should be filled with the required lubricating oil and replaced regularly.

Proficiency in the above seven precautions can greatly reduce mechanical failure and mechanical damage caused by incorrect operation, greatly extending the service life, stability and safety of the machine.